Consistent further development of the sensors from the well-known KX series from Kionix


Written at Thursday, 23 January 2020 11:01, Published in Haug Group

Consistent further development of the sensors from the well-known KX series from Kionix
The new sensors KX132-1211 and KX134-1211 have been optimized for use in industrial plants and IoT devices.

The KX134-1211 is a 3-axis accelerometer optimized for machine condition monitoring. At the same time, the sensor itself consumes less than half the current (0.67µA in low power mode) compared to conventional products. Additional features include Wake Up and Back to Sleep functions that contribute to lower power consumption, enabling sensing operation in battery-equipped wearable devices.

Advanced Data Path (ADP)
technology allows noise filtering and sensor signal processing normally carried out by the MCU to be performed by the accelerometer. They contribute to reducing MCU load and power consumption together with improved application performance. In addition, to meet industrial requirements, the sensing frequency and acceleration detection ranges have been increased to 8,500Hz and ±64g, respectively, while supporting operating temperatures up to 105°C.

 ROHM frequency

Contact person:

Dominik Peuker

Dominik Peuker

T +49 6081 405-180
F +49 6081 405-5180

News durchsuchen

Kategorie auswählen

The Haug Group: More than distribution.

As a medium-sized corporate group, the Haug Group stands for more than just electronics distribution. In addition to the distribution of electronic components, the Haug Group focuses on cable assembly, inductors and shielding solutions for low-frequency fields.

> more informations

© 2018 Haug Components Holding GmbH | Schelmenwasenstraße 9 | 70567 Stuttgart